Difference between revisions of "Raspberry PI Magnetometers and Accelerometers"
From Baltimore Node Wiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
==Slides== | ==Slides== | ||
| − | #Talk | + | #Talk [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsTalk.pdf Talk] |
| − | + | #Lab 1 [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab1.pdf Lab 1] | |
| − | #Lab | + | #Lab 2 |
==<span id="lab1"></span>Lab 1 Supplies== | ==<span id="lab1"></span>Lab 1 Supplies== | ||
Revision as of 14:31, 20 March 2019
Contents
Slides
Lab 1 Supplies
Equipment you likely already have
- Raspberry PI 3 or 3B (2B+ is an alternative)
- 8GB to 32GB microSD cards
Equipment you may have or could borrow from The Node
- USB keyboard and mouse for the PI
- Prototype board
- Jumper wires
- HDMI cable and monitor for the PI
What you will need to purchase
- BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)
Lab 2 Supplies
Equipment you likely already have
- Raspberry PI 3 or 3B (2B+ is an alternative)
- 16GB to 32GB microSD cards (or greater)
- Laptop with Windows 10, 8.1 or 7
Equipment you may have or could borrow from The Node
- Prototype board
- Jumper wires
- HDMI cable and monitor for the PI
What you will need to purchase (same as Lab 1)
- BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)
