Difference between revisions of "Raspberry PI Magnetometers and Accelerometers"

From Baltimore Node Wiki
Jump to navigationJump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Slides==
 
==Slides==
#Talk [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsTalk.pdf Talk]
+
#[http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsTalk.pdf Talk]
#Lab 1 [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab1.pdf Lab 1]
+
#[http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab1.pdf Lab 1]
#Lab 2  
+
#[http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab2.pdf Lab 2]
 +
 
 +
==Examples==
 +
[https://1drv.ms/f/s!Ar3pO7_GhJY9hOtmaUYC20lCv4T1-g Code]
  
 
==<span id="lab1"></span>Lab 1 Supplies==
 
==<span id="lab1"></span>Lab 1 Supplies==

Latest revision as of 14:03, 18 April 2019

Slides[edit | edit source]

  1. Talk
  2. Lab 1
  3. Lab 2

Examples[edit | edit source]

Code

Lab 1 Supplies[edit | edit source]

Equipment you likely already have[edit | edit source]

  1. Raspberry PI 3 or 3B (2B+ is an alternative)
  2. 8GB to 32GB microSD cards

Equipment you may have or could borrow from The Node[edit | edit source]

  1. USB keyboard and mouse for the PI
  2. Prototype board
  3. Jumper wires
  4. HDMI cable and monitor for the PI

What you will need to purchase[edit | edit source]

  1. BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)


Lab 2 Supplies[edit | edit source]

Equipment you likely already have[edit | edit source]

  1. Raspberry PI 3 or 3B (2B+ is an alternative)
  2. 16GB to 32GB microSD cards (or greater)
  3. Laptop with Windows 10, 8.1 or 7

Equipment you may have or could borrow from The Node[edit | edit source]

  1. Prototype board
  2. Jumper wires
  3. HDMI cable and monitor for the PI

What you will need to purchase (same as Lab 1)[edit | edit source]

  1. BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)