Difference between revisions of "Raspberry PI Magnetometers and Accelerometers"

From Baltimore Node Wiki
Jump to navigationJump to search
Line 1: Line 1:
 
==Slides==
 
==Slides==
#Talk
+
#Talk [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsTalk.pdf Talk]
#Lab 1 [[http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsTalk.pdf]]
+
#Lab 1 [http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab1.pdf Lab 1]
#Lab 2 [[http://www.cbsoftwareengineering.com/presentations/RaspberryPiOperatingSystemsLab1.pdf]]
+
#Lab 2
  
 
==<span id="lab1"></span>Lab 1 Supplies==
 
==<span id="lab1"></span>Lab 1 Supplies==

Revision as of 14:31, 20 March 2019

Slides

  1. Talk Talk
  2. Lab 1 Lab 1
  3. Lab 2

Lab 1 Supplies

Equipment you likely already have

  1. Raspberry PI 3 or 3B (2B+ is an alternative)
  2. 8GB to 32GB microSD cards

Equipment you may have or could borrow from The Node

  1. USB keyboard and mouse for the PI
  2. Prototype board
  3. Jumper wires
  4. HDMI cable and monitor for the PI

What you will need to purchase

  1. BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)


Lab 2 Supplies

Equipment you likely already have

  1. Raspberry PI 3 or 3B (2B+ is an alternative)
  2. 16GB to 32GB microSD cards (or greater)
  3. Laptop with Windows 10, 8.1 or 7

Equipment you may have or could borrow from The Node

  1. Prototype board
  2. Jumper wires
  3. HDMI cable and monitor for the PI

What you will need to purchase (same as Lab 1)

  1. BerryIMUv2-10DOF - an Accelerometer, Gyroscope, Magnetometer and Barometric/Altitude Sensor (https://www.amazon.com/BerryIMUv2-10DOF-Accelerometer-Gyroscope-Magnetometer-Barometric/dp/B072MN8ZRC/ref=sr_1_4?keywords=Ozzmaker&qid=1551718025&s=gateway&sr=8-4)